Optimisation Of Cutting Parameters Of Composite Material Laser Cutting Process By Taguchi Method

2017 5th International Conference on Mechanical Engineering, Materials Science and Civil Engineering

机械制造;材料科学;土木建筑工程

Lokesh, S.^1 ; Niresh, J.^1 ; Neelakrishnan, S.^1 ; Deepak Rahul, S.P.^1

Department of Automobile Engineering, PSG College of Technology, Coimbatore, India^1

关键词: Cutting parameters;    Laser cutting machine;    Laser cutting process;    MINITAB;    Orthogonal methodology;    Response surface methodology;    Surface roughness characteristics;    Taguchis method;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/324/1/012054/pdf
DOI  :  10.1088/1757-899X/324/1/012054

来源: IOP

【 摘 要 】

The aim of this work is to develop a laser cutting process model that can predict the relationship between the process input parameters and resultant surface roughness, kerf width characteristics. The research conduct is based on the Design of Experiment (DOE) analysis. Response Surface Methodology (RSM) is used in this work. It is one of the most practical and most effective techniques to develop a process model. Even though RSM has been used for the optimization of the laser process, this research investigates laser cutting of materials like Composite wood (veneer)to be best circumstances of laser cutting using RSM process. The input parameters evaluated are focal length, power supply and cutting speed, the output responses being kerf width, surface roughness, temperature. To efficiently optimize and customize the kerf width and surface roughness characteristics, a machine laser cutting process model using Taguchi L9 orthogonal methodology was proposed.