Enhanced oil recovery by nitrogen and carbon dioxide injection followed by low salinity water flooding for tight carbonate reservoir: experimental approach

International Conference on Functional Materials and Chemical Engineering 2017

材料科学;化学工业

Georges Lwisa, Essa^1 ; Abdulkhalek, Ashrakat R.^1

United Arab Emirates University, Al Ain, United Arab Emirates^1

关键词: Carbon dioxide injection;    Enhanced oil recovery;    Experimental approaches;    Pressure and temperature;    Reservoir conditions;    Technology development;    Tight carbonate reservoir;    Wettability alteration;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/323/1/012009/pdf
DOI  :  10.1088/1757-899X/323/1/012009

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Enhanced Oil Recovery techniques are one of the top priorities of technology development in petroleum industries nowadays due to the increase in demand for oil and gas which cannot be equalized by the primary production or secondary production methods. The main function of EOR process is to displace oil to the production wells by the injection of different fluids to supplement the natural energy present in the reservoir. Moreover, these injecting fluids can also help in the alterations of the properties of the reservoir like lowering the IFTs, wettability alteration, a change in pH value, emulsion formation, clay migration and oil viscosity reduction. The objective of this experiment is to investigate the residual oil recovery by combining the effects of gas injection followed by low salinity water injection for low permeability reservoirs. This is done by a series of flooding tests on selected tight carbonate core samples taken from Zakuum oil field in Abu Dhabi by using firstly low salinity water as the base case and nitrogen & CO2injection followed by low salinity water flooding at reservoir conditions of pressure and temperature. The experimental results revealed that a significant improvement of the oil recovery is achieved by the nitrogen injection followed by the low salinity water flooding with a recovery factor of approximately 24% of the residual oil.