Reverse engineering of w?rner type drilling machine structure.

4th Asia Pacific Conference on Manufacturing Systems; 3rd International Manufacturing Engineering Conference

Wibowo, A.^1 ; Belly, I.^1 ; Llhamsyah, R.^1 ; Indrawanto^1 ; Yuwana, Y.^1

Faculty of Mechanical and Aerospace Engineering, Institut Teknologi Bandung, Jalan Ganesa 10, Bandung

40132, Indonesia^1

关键词: Dimensional tolerance;    Machine performance;    Machine structures;    Production facility;    Resource capabilities;    Reverse engineering process;    Structure component;    Tolerance stack-up;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/319/1/012018/pdf
DOI  :  10.1088/1757-899X/319/1/012018

来源: IOP

【 摘 要 】

A product design needs to be modified based on the conditions of production facilities and existing resource capabilities without reducing the functional aspects of the product itself. This paper describes the reverse engineering process of the main structure of the wörner type drilling machine to obtain a machine structure design that can be made by resources with limited ability by using simple processes. Some structural, functional and the work mechanism analyzes have been performed to understand the function and role of each basic components. The process of dismantling of the drilling machine and measuring each of the basic components was performed to obtain sets of the geometry and size data of each component. The geometric model of each structure components and the machine assembly were built to facilitate the simulation process and machine performance analysis that refers to ISO standard of drilling machine. The tolerance stackup analysis also performed to determine the type and value of geometrical and dimensional tolerances, which could affect the ease of the components to be manufactured and assembled.