The Study on Grinding Ratio in Form Grinding with White Fused Alumina (WA) Grinding Wheels

4th International Conference on Advanced Engineering and Technology

Junming, Wang^1 ; Jiong, Wang^2 ; Deyuan, Lou^1

School of Mechanical Engineering, Hubei University of Technology, Wuhan

430068, China^1

School of Mechatronics Engineering, Harbin Institute of Technology, Harbin, China^2

关键词: Form grinding;    Fused aluminas;    Grinding efficiency;    Grinding ratio;    Nonlinear curves;    Prediction equations;    Sectional areas;    Tri-axial;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/317/1/012006/pdf
DOI  :  10.1088/1757-899X/317/1/012006

来源: IOP

【 摘 要 】

The study is carried out based on an experiment of form grinding spur rack with white fused alumina (WA) grinding wheels. In the experiment, SOV-3020A type tri-axial image mapper is utilized to measure the profile of the tooth space in the rack, and the curve equations between the sectional area of the tooth space and the tooth sequence under different grinding depths are established by nonlinear curve regress using software of origin8.0. Then, it deduces the prediction equations for current grinding ratio and cumulative grinding ratio under different grinding depths. The result shows that the grinding ratio is exponential decline relationship with the increase of the number of the tooth to be ground under the same grinding depth, and the decline speed is fast in the initial stage. With the increase of grinding depth, the grinding ratio increases gradually. The cumulative grinding ratio is about twice as high as the current grinding ratio. Thus, large grinding depth is generally used in rough grinding to improve grinding efficiency.