Comparative analysis layers method of t-beam reinforcement

Quality in Research: International Symposium on Materials, Metallurgy, and Chemical Engineering

材料科学;冶金学;化学工业

Galuh, Dimas Langga Chandra^1

Fakultas Teknik Universitas Sarjanawiyata Tamansiswa, Jl.Kusumanegara 157, Yogyakarta, Indonesia^1

关键词: Comparative analysis;    Flexural capacity;    Heavy equipment;    High-tensile strength;    Maximum loading;    Negative moments;    Reinforcement materials;    T beams;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/316/1/012043/pdf
DOI  :  10.1088/1757-899X/316/1/012043

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Wire rope commonly used by heavy equipments in order to operate lift weights. wire ropes have a high tensile strength, that in this study tried to use these materials as reinforcement material in the T-beam negative moment area. In this analysis the T beam reinforcement using method layers of this by comparing the layers1 method (ignoring the wing reinforcement) and layers2 method (considering the wing reinforcement). Results of the test showed that the maximum loading for BK, BP1, and BP2 specimens were 88.5 kN, 180 kN, and 259 kN, respectively. The comparative flexural capacity by layers1 method (ignoring the wing reinforcement) for BK, BP1, and BP2 specimens were 1.28, 0.76, and 0.78. The comparative flexural capacity by layers2 method (considering the wing reinforcement) for BK, BP1, and BP2 specimens were 1.28, 0.79, and 0.80, respectively. Comparative ratios of layers2 method for BK, BP1, and BP2 to layers1 method were 1, 0,96 and 0,975, respectively. This result means of comparative analysis layers methode similar and methods layers2 most closely with test results.