The Design of Connection Solid Oxide Fuel Cell (SOFC) Integrated Grid with Three-Phase Inverter

Quality in Research: International Symposium on Materials, Metallurgy, and Chemical Engineering

材料科学;冶金学;化学工业

Darjat^1,2 ; Sulistyo^2 ; Triwiyatno, Aris^1 ; Thalib, Humaid^1

Department of Electrical Engineering, Diponegoro University, Semarang

50275, Indonesia^1

Department of Mechanical Engineering, Diponegoro University, Semarang

50275, Indonesia^2

关键词: Distribution systems;    Energy technologies;    Fuel cell technologies;    Generation technologies;    Planning and design;    Potential sources;    Three phase voltage;    Three-phase inverter;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/316/1/012057/pdf
DOI  :  10.1088/1757-899X/316/1/012057

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Fuel cell technology is a relatively new energy-saving technology that has the potential to replace conventional energy technologies. Among the different types of generation technologies, fuel cells is the generation technologies considered as a potential source of power generation because it is flexible and can be placed anywhere based distribution system. Modeling of SOFC is done by using Nernst equation. The output power of the fuel cell can be controlled by controlling the flow rate of the fuels used in the process. Three-phase PWM inverter is used to get the form of three-phase voltage which same with the grid. In this paper, the planning and design of the SOFC are connected to the grid.