Optimization of Robotic Spray Painting process Parameters using Taguchi Method

International Conference on Advances in Materials and Manufacturing Applications 2017

Chidhambara, K.V.^1 ; Latha Shankar, B.^1 ; Vijaykumar^1

Department of IEM, Siddaganga Institute of Technology, Tumakuru, Karnataka, India^1

关键词: Control parameters;    Individual factors;    Influencing parameters;    Multiple regression model;    Orthogonal array;    Performance characteristics;    Process parameters;    Taguchi's design of experiments;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/310/1/012108/pdf
DOI  :  10.1088/1757-899X/310/1/012108

来源: IOP

【 摘 要 】

Automated spray painting process is gaining interest in industry and research recently due to extensive application of spray painting in automobile industries. Automating spray painting process has advantages of improved quality, productivity, reduced labor, clean environment and particularly cost effectiveness. This study investigates the performance characteristics of an industrial robot Fanuc 250ib for an automated painting process using statistical tool Taguchi's Design of Experiment technique. The experiment is designed using Taguchi's L25 orthogonal array by considering three factors and five levels for each factor. The objective of this work is to explore the major control parameters and to optimize the same for the improved quality of the paint coating measured in terms of Dry Film thickness(DFT), which also results in reduced rejection. Further Analysis of Variance (ANOVA) is performed to know the influence of individual factors on DFT. It is observed that shaping air and paint flow are the most influencing parameters. Multiple regression model is formulated for estimating predicted values of DFT. Confirmation test is then conducted and comparison results show that error is within acceptable level.