The utilization of stone ash on cellular lightweight concrete

TALENTA - Conference on Engineering, Science and Technology 2017

工业技术;自然科学

Karolina, R.^1 ; Sianipar, Y.G.C.^1

Civil Engineering, Universitas Sumatera Utara, Indonesia^1

关键词: Aerated concrete;    Basic composition;    Concrete bricks;    Lightweight brick;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/309/1/012084/pdf
DOI  :  10.1088/1757-899X/309/1/012084

来源: IOP

【 摘 要 】

Lightweight concrete brick is a brick which made of cement, sand, water, and foam as the basic composition. This brick are divided into 2, based on the foam used such as AAC (Autoclave Aerated Concrete) that use aluminium paste and CLC(Cellular Lightweight Concrete) that use foaming agent from BASF as its foaming material. In this trial, the lightweight brick that are ging to be use are the CLC with foaming agent as its foaming material with the mixture of stone ash that are produced by the Stone Crusher with spesific gravity 2666 kg/m3as their partly sand substitution . In this research, the stone ash variant that are used are 10%, 15%, and 20% from the amount of sand that planned before. After casting, the result of the 10% will receive a reduction of compressive strength while an increasing in absorption as 25.07% and 39.005% and the 15% variant will recieve a reduction of compressive strength as much as 65.8% and a reduction of absorption as much as 17.441% and the 20% variant will recieve a reduction of compressive strength as much as 67.4% while an increasing of absorption as much as 17.956%.