Production layout improvement by using line balancing and Systematic Layout Planning (SLP) at PT. XYZ

TALENTA - Conference on Engineering, Science and Technology 2017

工业技术;自然科学

Buchari^1 ; Tarigan, U.^1 ; Ambarita, M.B.^1

Industrial Engineering Department, Faculty of Engineering, Universitas Sumatera Utara, Medan

20155, Indonesia^1

关键词: Material flow pattern;    Production layout;    Production line;    Production process;    Production system;    Ranked positional weights;    Systematic layout planning;    Wood processing;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/309/1/012116/pdf
DOI  :  10.1088/1757-899X/309/1/012116

来源: IOP

【 摘 要 】

PT. XYZ is a wood processing company which produce semi-finished wood with production system is make to order. In the production process, it can be seen that the production line is not balanced. The imbalance of the production line is caused by the difference in cycle time between work stations. In addition, there are other issues, namely the existence of material flow pattern is irregular so it resulted in the backtracking and displacement distance away. This study aimed to obtain the allocation of work elements to specific work stations and propose an improvement of the production layout based on the result of improvements in the line balancing. The method used in the balancing is Ranked Positional Weight (RPW) or also known as Helgeson Birnie method. While the methods used in the improvement of the layout is the method of Systematic Layout Planning (SLP). By using Ranked Positional Weight (RPW) obtained increase in line efficiency becomes 84,86% and decreased balance delay becomes 15,14%. Repairing the layout using the method of Systematic Layout Planning (SLP) also give good results with a reduction in path length becomes 133,82 meters from 213,09 meters previously or a decrease of 37.2%.