The analysis of mechanical properties of non autoclaved aerated concrete with the substitution of fly ash and bottom ash

TALENTA - Conference on Engineering, Science and Technology 2017

工业技术;自然科学

Karolina, R.^1 ; Muhammad, F.^1

Civil Engineering Department, Universitas Sumatera Utara (USU) Jl. Perpustakaan, Kampus USU, Medan

20155, Indonesia^1

关键词: As substitutions;    Autoclaved aerated concrete;    Cylindrical shapes;    Fine aggregates;    Heavy metal oxides;    Light weight;    Quality of concrete;    Test specimens;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/309/1/012133/pdf
DOI  :  10.1088/1757-899X/309/1/012133

来源: IOP

【 摘 要 】

Based on PP. No.85 of 1999 on the management of hazardous and toxic (B3), fly ash and bottom ash wastes are categorized into B3 waste because there are heavy metal oxide contents that can pollute the environment. One form of environmental rescue that can be applied is to utilize waste fly ash and bottom ash in the manufacture of concrete. In this research, fly ash and bottom ash waste are used as substitution of cement and fine aggregate to make lightweight concrete. The purpose of this research is to know the mechanical properties of non-Autoclaved aerated lightweight concrete (NAAC) with FA and BA substitution to cement and fine aggregate which is expected to improve the quality of concrete. The NAAC lightweight concrete in this study is divided into 4 categories: normal NAAC lightweight concrete, NAAC lightweight NAAC substituted concrete with FA, NAAC lightweight concrete substituted with BA, and NAAC combined light weight from FA and BA with variations of 10%, 20% And 30%. The test specimen used in cylindrical shape, which was tested at the age of 28 days, amounted to 90 pieces and consisted of 10 variations. Each variation amounted to 9 samples. Based on the test results with FA and BA substitutions of 10%, 20%, and 30%, the highest compressive strength was achieved in samples with FA 30% of 12.687 MPa, maximum tensile strength achieved in samples with FA 30% of 1,540 MPa, The highest absorption was achieved in normal NAAC of 5.66%. Based on the weight of the contents of all samples, samples can be categorized in lightweight concrete, since the weight of the contents is less than 1900 kg / m3.