Effect of distributed generation installation on power loss using genetic algorithm method

10th International Conference Numerical Analysis in Engineering

数学;工业技术

Hasibuan, A.^1 ; Masri, S.^2 ; Othman, W.A.F.W.B.^2

Department of Electrical Engineering, Universitas Malikussaleh, Indonesia^1

School of Electric and Electronic Engineering, Universiti Sains Malaysia, Malaysia^2

关键词: Case-studies;    Distribution system loss;    Distribution systems;    Optimum location;    Power System;    Power-losses;    Standard system;    Voltage drop;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/308/1/012034/pdf
DOI  :  10.1088/1757-899X/308/1/012034

学科分类：工业工程学

来源: IOP

【 摘 要 】

Injection of the generator distributed in the distribution network can affect the power system significantly. The effect that occurs depends on the allocation of DG on each part of the distribution network. Implementation of this approach has been made to the IEEE 30 bus standard and shows the optimum location and size of the DG which shows a decrease in power losses in the system. This paper aims to show the impact of distributed generation on the distribution system losses. The main purpose of installing DG on a distribution system is to reduce power losses on the power system.Some problems in power systems that can be solved with the installation of DG, one of which will be explored in the use of DG in this study is to reduce the power loss in the transmission line. Simulation results from case studies on the IEEE 30 bus standard system show that the system power loss decreased from 5.7781 MW to 1,5757 MW or just 27,27%. The simulated DG is injected to the bus with the lowest voltage drop on the bus number 8.