Control Systems of Rubber Dryer Machinery Components Using Programmable Logic Control (PLC)

International Conference on Mechanical Engineering and Applied Composite Materials

机械制造;材料科学

Hendra^1 ; Yulianto, A.S.^1 ; Indriani, A.^2 ; Hernadewita^3 ; Hermiyetti^4

Mechanical Engineering Dept., University of Bengkulu, Indonesia^1

Electrical Engineering Dept., University of Bengkulu, Indonesia^2

Industrial Engineering Dept., University of Mercubuana, Jakarta, Indonesia^3

Economics Faculty, University of Bakrie, Jakarta, Indonesia^4

关键词: Control inputs;    Drying chambers;    Drying systems;    Machinery components;    Motion components;    Programmable logic control;    Rotary dryers;    System components;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/307/1/012021/pdf
DOI  :  10.1088/1757-899X/307/1/012021

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Application of programmable logic control (PLC) is widely used on the control systems in the many field engineering such as automotive, aviation, food processing and other industries [1-2]. PLC is simply program to control many automatic activity, easy to use, flexible and others. PLC using the ladder program to solve and regulated the control system component. In previous research, PLC was used for control system of rotary dryer machine. In this paper PLC are used for control system of motion component in the rubber dryer machinery. Component of rubber dryer machine is motors, gearbox, sprocket, heater, drying chamber and bearing. Principle working of rubber dryer machinery is wet rubber moving into the drying chamber by sprocket. Sprocket is driven by motors that conducted by PLC to moving and set of wet rubber on the drying chamber. Drying system uses greenhouse effect by making hanger dryer design in the form of line path. In this paper focused on motion control system motors and sensors drying rubber using PLC. The results show that control system of rubber dryer machinery can work in accordance control input and the time required to dry the rubber.