Non Destructive Test Dye Penetrant and Ultrasonic on Welding SMAW Butt Joint with Acceptance Criteria ASME Standard

2nd International Conference on Innovation in Engineering and Vocational Education

工业技术;教育

Endramawan, T.^1 ; Sifa, A.^1

Mechanical Engineering Department, Politeknik Negeri Indramayu, Lohbener-Indramayu, Indonesia^1

关键词: Acceptance criteria;    American society of mechanical engineers;    Butt joints;    Dye penetrants;    Electrode diameters;    Non-destructive test;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/306/1/012122/pdf
DOI  :  10.1088/1757-899X/306/1/012122

来源: IOP

【 摘 要 】

The purpose of this research is to know the type of discontinuity of SMAW welding result and to determine acceptance criteria based on American Society of Mechanical Engineer (ASME) standard. Material used is mild steel 98,71% Fe and 0,212% C with hardness 230 VHN with specimen diameter 20 cm and thickness 1.2 cm which is welded use SMAW butt joint with electrode for rooting LB 52U diameter 2.6 mm, current 70 Ampere and voltage 380 volt, filler used LB 5218 electrode diameter 3.2 mm with current 80 Ampere and 380 volt. The method used to analyze the welded with non destructive test dye penetrant (PT) method to see indication on the surface of the object and Ultrasonic (UT) to see indication on the sub and inner the surface of the object, the result is discontinuity recorded and analyzed and then the discontinuity is determine acceptance criteria based on the American Society of Mechanical Engineer (ASME) standards. The result show the discontinuity of porosity on the surface of the welded and inclusion on sub material used ultrasonic test, all indication on dye penetrant or ultrasonic test if there were rejected of result of welded that there must be gouging on part which rejected and then re-welding.