Identification of the Thickness of Nugget on Worksheet Spot Welding Using Non Destructive Test (NDT) _ Effect of Pressure

2nd International Conference on Innovation in Engineering and Vocational Education

工业技术;教育

Sifa, A.^1 ; Baskoro, A.S.^2 ; Sugeng, S.^2 ; Badruzzaman, B.^1 ; Endramawan, T.^1

Mechanical Engineering Department, Politeknik Negeri Indramayu, Indramayu, Indonesia^1

Mechanical Engineering Department, Faculty of Engineering, Universitas Indonesia, Depok, Indonesia^2

关键词: Manual measurements;    Non destructive testing;    Non-destructive test;    Non-destructive test methods;    Pressure variables;    Resistance spot welding;    Thermo-mechanical loading;    Welding parameters;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/306/1/012009/pdf
DOI  :  10.1088/1757-899X/306/1/012009

来源: IOP

【 摘 要 】

Resistance Spot Welding (RSW) is a process of connecting between two worksheet with thermomechanical loading process, RSW is widely used in automotive industry, the quality of splicing spot welding is influenced by several factors. One of the factors at the time of the welding process is pressure. The quality of welding on the nuggets can be determined by undertaking non-destructive testing by using Non Destructive Test (NDT) - Ultrasonic Test. In the NDT test is done by detecting the thickness of the nugget area, the purpose of research conducted to determine the effect of pressure to welding quality with Nugget thickness gauge measurement with Non Destructive Test method and manual measurement with micrometer, Experimental welding process by entering the welding parameters that have been specified and pressure variables 1 -5 bars on the worksheet thickness of 1 mm. The results of testing with NDT show there is addition of thickness in nugget superiority after compare with measurement result of thickness of nugget with micrometer which slightly experience thickness in nugget area, this indicates that the welding results have a connection between worksheet 1 and worksheet 2.