Clay Stabilization Using the Ash of Mount Sinabung in Terms of the Value of California Bearing Ratio (CBR)

2nd International Conference on Innovation in Engineering and Vocational Education

工业技术;教育

Hastuty, I.P.^1 ; Roesyanto, R.^1 ; Napitupulu, S.M.A.^1

Civil Engineering Department, Universitas Sumatera Utara, Medan, Indonesia^1

关键词: American Association of State Highway and Transportation Officials;    California bearing ratio;    Chemical stabilization;    Clay stabilization;    Soil-stabilization process;    Stabilizing agents;    Technical requirement;    Unified soil classification systems;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/306/1/012060/pdf
DOI  :  10.1088/1757-899X/306/1/012060

来源: IOP

【 摘 要 】

Most areas in Indonesia consist of clay soils with high plasticity so that to meet technical requirements the soil needs improvement, which is known as soil stabilization.There are three ways of soil stabilization process, i.e. mechanical, physical and chemical. In this study, chemical stabilization was performed, that was by adding stabilizing agents to the soil. The stabilizing agent used was the ash of Mount Sinabung. Since 2010 until now, Sinabung Mountain is still experiencing eruption that produces a lot of volcanic ash and it inconveniences the environment. So, it is expected that this research will be able to optimize the utilization of Sinabung ash. The purpose of this study was to investigate the effect of the addition of Mount Sinabung ash to CBR (California Bearing Ratio) value, to determine the effect of the curing time of one day and fourteen days mixture on the CBR value, and to find the mixed content with effective curing time to produce the largest CBR value. Based on this study, the soil type CL (Clay - Low Plasticity) was obtained, based on the classification of USCS (Unified Soil Classification System) and categorized as A-6 (6) based on the classification of AASHTO (American Association of State Highway and Transportation officials) with the most effective mixed stabilizer material which was the variation of 10% Mount Sinabung ash with fourteen days of curing time. The CBR value resulted from the mixture of 10% Sinabung ash that was cured within fourteen days was 8.95%. By the increase of the content of the Sinabung ash, the CBR value always improved to the level of 10%, Sinabung ash then decreased and became constant at the mixture of higher volcanic ash mixture but remained above the CBR value of the original soil.