Monitoring of Surface Roughness in Aluminium Turning Process

2017 2nd International Conference on Functional Materials and Metallurgy

材料科学;冶金学

Chaijareenont, Atitaya^1 ; Tangjitsitcharoen, Somkiat^1

Department of Industrial Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok

10330, Thailand^1

关键词: Coated carbide tools;    Cutting conditions;    Cutting forces;    Cutting parameters;    Dynamic cutting forces;    Surface roughness profiles;    Tool nose radius;    Turning process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/303/1/012013/pdf
DOI  :  10.1088/1757-899X/303/1/012013

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

As the turning process is one of the most necessary process. The surface roughness has been considered for the quality of workpiece. There are many factors which affect the surface roughness. Hence, the objective of this research is to monitor the relation between the surface roughness and the cutting forces in aluminium turning process with a wide range of cutting conditions. The coated carbide tool and aluminium alloy (Al 6063) are used for this experiment. The cutting parameters are investigated to analyze the effects of them on the surface roughness which are the cutting speed, the feed rate, the tool nose radius and the depth of cut. In the case of this research, the dynamometer is installed in the turret of CNC turning machine to generate a signal while turning. The relation between dynamic cutting forces and the surface roughness profile is examined by applying the Fast Fourier Transform (FFT). The experimentally obtained results showed that the cutting force depends on the cutting condition. The surface roughness can be improved when increasing the cutting speed and the tool nose radius in contrast to the feed rate and the depth of cut. The relation between the cutting parameters and the surface roughness can be explained by the in-process cutting forces. It is understood that the in-process cutting forces are able to predict the surface roughness in the further research.