Investigation of the Hydraulic Characteristics of Capillary Elements of the Injector Head of Jet Engines under Conditions of Isothermal Flow of A Liquid

2017 International Conference on Aerospace Technology, Communications and Energy Systems

航空航天工程;无线电电子学;能源学

Nigodjuk, V.E.^1 ; Sulinov, A.V.^1

Institute of Engines and Power Plants, Samara University, Samara, Russia^1

关键词: Geometric dimensions;    Hydraulic characteristic;    Hydraulic resistances;    Isothermal flows;    Isothermal fluid flow;    Laminar and turbulent flow;    Linear coefficients;    Surface tension force;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/302/1/012061/pdf
DOI  :  10.1088/1757-899X/302/1/012061

学科分类：航空航天科学

来源: IOP

【 摘 要 】

The article presents the results of an experimental study of the hydraulic characteristics of capillary elements of the injector head of jet engines in isothermal fluid flow and the proposed method of their calculation. The main geometric dimensions of the capillaries in the experiment were changed in the following range: Inner diameter from 0.16 to 0.36 mm, length from 4.3 to 158 mm and relative length from 25 to 614 and the inlet edge of the capillaries: sharp or smooth the leading edge. As the working fluid during the tests were distilled water, acetone and ethyl alcohol. Based on the results of a study of the dependences for calculation of ultimate losses in laminar and turbulent flow regimes in capillary tubes with smooth and sharp edges input. The influence of surface tension forces on loss of input on a sharp cutting edge. Experimentally confirmed the possibility of calculating the linear coefficient of hydraulic resistance of capillary tubes with a diameter of 0.16-0.36 mm in isothermal stable during the known dependencies that are valid for hydrodynamically smooth round tube.