Linearization of Positional Response Curve of a Fiber-optic Displacement Sensor

2017 International Conference on Aerospace Technology, Communications and Energy Systems

航空航天工程;无线电电子学;能源学

Babaev, O.G.^1 ; Matyunin, S.A.^1 ; Paranin, V.D.^1

Samara National Research University, Moskovskoe Shosse 34, Samara

443086, Russia^1

关键词: Calibration functions;    Contactless sensors;    Fiber optic displacement sensor;    Linear displacements;    Magnetic-field intensity;    Optical measuring instrument;    Temperature dependence;    Temperature stabilization;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/302/1/012051/pdf
DOI  :  10.1088/1757-899X/302/1/012051

学科分类：航空航天科学

来源: IOP

【 摘 要 】

Currently, the creation of optical measuring instruments and sensors for measuring linear displacement is one of the most relevant problems in the area of instrumentation. Fiber-optic contactless sensors based on the magneto-optical effect are of special interest. They are essentially contactless, non-electrical and have a closed optical channel not subject to contamination. The main problem of this type of sensors is the non-linearity of their positional response curve due to the hyperbolic nature of the magnetic field intensity variation induced by moving the magnetic source mounted on the controlled object relative to the sensing element. This paper discusses an algorithmic method of linearizing the positional response curve of fiber-optic displacement sensors in any selected range of the displacements to be measured. The method is divided into two stages: 1 - definition of the calibration function, 2 - measurement and linearization of the positional response curve (including its temperature stabilization). The algorithm under consideration significantly reduces the number of points of the calibration function, which is essential for the calibration of temperature dependence, due to the use of the points that randomly deviate from the grid points with uniform spacing. Subsequent interpolation of the deviating points and piecewise linear-plane approximation of the calibration function reduces the microcontroller storage capacity for storing the calibration function and the time required to process the measurement results. The paper also presents experimental results of testing real samples of fiber-optic displacement sensors.