Impact of Grinding Wheel Position on Flute Profile of End mill and Cutting Process

2017 International Conference on Aerospace Technology, Communications and Energy Systems

航空航天工程;无线电电子学;能源学

Zhidyaev, Alexey N.^1

Samara National Research University, Institute of Engine and Power Plant Engineering, Moskovskoye shosse, 34, Samara region, Samara

443086, Russia^1

关键词: Cross-section area;    Cutting forces;    Cutting process;    End mill;    Grinding operations;    Workpiece;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/302/1/012069/pdf
DOI  :  10.1088/1757-899X/302/1/012069

学科分类：航空航天科学

来源: IOP

【 摘 要 】

The article provides the research on flute profile of end mills. The flute profile of a specified end mill design is affected by grinding wheel position relative to end mill workpiece in grinding operation. Different profiles were obtained, their rake surfaces and cross section areas were compared. Temperatures and cutting forces were evaluated via finite element analysis for these profiles in case of titanium alloy and heat-resistant alloy machining. Finally, the impact of flute profile on cutting process was assessed.