Hot air impingement on a flat plate using Large Eddy Simulation (LES) technique

8th TSME-International Conference on Mechanical Engineering

Plengsa-Ard, C.^1 ; Kaewbumrung, M.^1

Mechanical Engineering Department, Kasetsart University, Chatuchak, Bangkok

10900, Thailand^1

关键词: Constant surface temperatures;    Heat flux distributions;    Heat transfer and flows;    Heat transfer predictions;    Impingement surfaces;    Jet-to-plate spacing;    Large Eddy simulation techniques;    Smagorinsky constants;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/297/1/012035/pdf
DOI  :  10.1088/1757-899X/297/1/012035

来源: IOP

【 摘 要 】

Impinging hot gas jets to a flat plate generate very high heat transfer coefficients in the impingement zone. The magnitude of heat transfer prediction near the stagnation point is important and accurate heat flux distribution are needed. This research studies on heat transfer and flow field resulting from a single hot air impinging wall. The simulation is carried out using computational fluid dynamics (CFD) commercial code FLUENT. Large Eddy Simulation (LES) approach with a subgrid-scale Smagorinsky-Lilly model is present. The classical Werner-Wengle wall model is used to compute the predicted results of velocity and temperature near walls. The Smagorinsky constant in the turbulence model is set to 0.1 and is kept constant throughout the investigation. The hot gas jet impingement on the flat plate with a constant surface temperature is chosen to validate the predicted heat flux results with experimental data. The jet Reynolds number is equal to 20,000 and a fixed jet-to-plate spacing of H/D = 2.0. Nusselt number on the impingement surface is calculated. As predicted by the wall model, the instantaneous computed Nusselt number agree fairly well with experimental data. The largest values of calculated Nusselt number are near the stagnation point and decrease monotonically in the wall jet region. Also, the contour plots of instantaneous values of wall heat flux on a flat plate are captured by LES simulation.