Aspects regarding manufacturing technologies of composite materials for brake pad application

International Conference on Applied Sciences 2017

Craciun, A.L.^1 ; Hepu, T.^1 ; Pinca-Bretotean, C.^1

Politehnica University of Timisoara, Engineering and Management Department, 5 Revolutiei Street, Hunedoara

331128, Romania^1

关键词: Automotive braking systems;    Basic characteristics;    Electronic controls;    Hydraulic control systems;    Manufacturing process;    Manufacturing technologies;    Organic composite materials;    Technical performance;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/294/1/012003/pdf
DOI  :  10.1088/1757-899X/294/1/012003

来源: IOP

【 摘 要 】

Current needs in road safety, requires the development of new technical solutions for automotive braking system. Their safe operation is subject to following factors: concept design, materials used and electronic control. Among the factors previously listed, choice of materials and manufacturing processes are difficult stage but very important for achieving technical performance and getting a relatively small cost of constituting parts of brake system. The choice is based on the promotion of organic composite material, popular in areas where the weight of materials plays an important role. The brake system is composed of many different parts including brake pads, a master cylinder, wheel cylinders and a hydraulic control system. The brake pads are an important component in the braking system of automotive. These are of different types, suitable for different types of automotive and engines. Brake pads are designed for friction stability, durability, minimization of noise and vibration. The typology of the brake pads depends on the material which they are made. The aim of this paper is to presents the manufacturing technologies for ten recipes of composite material used in brake pads applications. In this work will be done: choosing the constituents of the recipes, investigation of their basic characteristics, setting the proportions of components, obtaining the composite materials in laboratory, establishing the parameters of manufacturing technology and technological analysis.