Antropometric parameters problem solving of shoe lasts by deforming membranes with medium weight

International Conference on Applied Sciences 2017

Albu, A.V.^1 ; Anghel Drugarin, C.V.^2 ; Barla, E.M.^3 ; Porav, V.^1

University of Oradea, Department of Textile-Leather and Industrial Management, B. Stefnescu Delavrancea str., no. 4, Oradea

4410058, Romania^1

Eftimie Murgu University of Resita, Department of Electrical Engineering and Industrial Informatics, Revolution str., no 5, Hunedoara

331128, Romania^2

University of Oradea, Department of Energy Engineering, Universitii str., no 1-5, Oradea

410087, Romania^3

关键词: Anthropometric parameters;    Cad cams;    MATLAB environment;    Research results;    Shoe last;    Simulation of matlabs;    Virtual modeling;    Woven materials;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/294/1/012031/pdf
DOI  :  10.1088/1757-899X/294/1/012031

来源: IOP

【 摘 要 】

The paper presents research results into getting a virtual model of shoe last and anthropometric parameters change. The most important change occurs in the fingers region. Alternatives CAD-CAM technology for next generation is based on DELCAM software for the CAM procedure and simulation of MATLAB software. This research has led to the virtual changes of the last, anthropometric parameter - the width of the fingers (ld) and shoe last length - (Lp) and images have been achieved with the representation in section of the shoe last changed from the original shoe lasts by FEM method (Finite element method) in MATLAB environment. The results are applied in the textile industry and in the elaboration of linings consumption or in the development of leather substitutes on fabric, knitted or woven material type.