Researches on the development of new composite materials complete / partially biodegradable using natural textile fibers of new vegetable origin and those recovered from textile waste

International Conference on Applied Sciences 2017

Todor, M.P.^1 ; Bulei, C.^1 ; Heput, T.^2 ; Kiss, I.^2

University Politehnica Timisoara, Doctoral School, Timisoara, Hunedoara, Romania^1

University Politehnica Timisoara, Faculty of Engineering Hunedoara, Department of Engineering and Management, Hunedoara, Romania^2

关键词: Biodegradable composites;    Natural textile fibers;    Polymeric composites;    Realization Technologies;    Reinforcement phase;    Textile materials;    Thermo-mechanical;    Tribological performance;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/294/1/012021/pdf
DOI  :  10.1088/1757-899X/294/1/012021

来源: IOP

【 摘 要 】

The objective of the research is to develop new fully / partially biodegradable composite materials by using new natural fibers and those recovered from various wastes. Thus, the research aims to obtain some composites with matrix of various types of polymeric materials and the reinforcement phase of textile materials (of different natures, morphologies and composites) so that the resulting products to be (bio)degradable. The textile inserts used as raffle are ecological, non-toxic and biodegradable and they contain (divided or in combination) bast fibers (flax, hemp, jute) and other vegetable fibers (cotton, wool) as plain yarn or fabric, which can replace fibers of glass commonly used in polymeric composites. The main activities described in this article are carried out during the first phase of the research (phase I - initiation of research) and they are oriented towards the choice of types of textile inserts from which the composites will be obtained (the materials needed for the raffle), the choice of the types of polymers (the necessary materials for matrices) and choosing the variants of composites with different types and proportions of the constituent content (proposals and working variants) and choosing the right method for obtaining samples of composite materials (realization technology). The purpose of the research is to obtain composite materials with high structural, thermo-mechanical and / or tribological performances, according to ecological norms and international requirements in order to replace the existing classical materials, setting up current, innovative and high performance solutions, for applications in top areas such as automotive industry and not only.