Analysis of Causes of Defects Gloves and Bar Soap Using Failure Mode and Effect Analysis (FMEA) in XYZ Company

2nd Annual Applied Science and Engineering Conference

工业技术;自然科学

Siregar, K.^1 ; Siregar, S.F.^1

Department of Industrial Engineering, Faculty of Engineering, Universitas Sumatera Utara, Jl. Almamater Kampus USU, Medan

2016, Indonesia^1

关键词: Failure mode and effect analysis;    Limit sets;    Machine settings;    Mechanical defects;    Potential failures;    Tumble dryers;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/288/1/012089/pdf
DOI  :  10.1088/1757-899X/288/1/012089

来源: IOP

【 摘 要 】

XYZ is a company engaged in the production of gloves and soap. The problem faced by XYZ Company is a disability that exceeded the standard limit set by the company. The disability can be derived from various aspects such as raw materials, machinery, people and work methods used. Types of defects that occur are for glove products such as thickness, torn and leaking. While the defects that occur in the soap bars product are dented, broken and cracked. Under these conditions, it is necessary to the completion of the cause of disability by using Method Failure Mode and Effect Analysis (FMEA) for analysing each potential failure cause mechanical defects, prevention and detection. The formula used is RPN (Risk Proirit1.y Number) which is a scale of Severity x occurrence x Detection. Results indicate if the product FMEA glove, the highest RPN of 126 is the unsuitable tumble dryer machine setting that causes the type of disability in the thickness of the glove. While on the soap products, the highest RPN of 168 is on the human factor is the lack of skill of workers. Both results of a given proposal are that the company controls the machine process so that the drying standard is achieved and provides training to the workers to improve the skills of workers.