Numerical Simulation of Roller Levelling using SIMULIA Abaqus

3rd International Scientific and Technical Conference on Scientific and Technical Progress in Ferrous Metallurgy - SATPIFM 2017

Trusov, K.A.^1 ; Mishnev, P.A.^1 ; Kopaev, O.V.^1 ; Nushtaev, D.V.^2

JSC Severstal Management, Mira street 30, Cherepovets

RU-162600, Russia^1

TESIS Ltd., Unnatov street 18, Moscow

RU-125083, Russia^2

关键词: 2-D model;    Adjustable parameters;    Elastic-plastic Material;    FE model;    IS development;    Practical use;    Roller levelling;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/287/1/012014/pdf
DOI  :  10.1088/1757-899X/287/1/012014

来源: IOP

【 摘 要 】

The finite element (FE) 2D-model of roller levelling process is developed in the SIMILIA Abaqus. The objective of this paper is development FE-model and investigation of adjustable parameters of roller leveller together with elastic-plastic material behaviour. Properties of the material were determined experimentally. After levelling, the strip had a residual stress distribution. The longbow after cutting is predicted too. Recommendation for practical use were proposed.