Influence of dunite mineral additive on strength of cement

International Conference "Modern Technologies and Materials of New Generations"

Vasilyeva, A.A.^1 ; Moskvitina, L.V.^1 ; Moskvitin, S.G.^1 ; Lebedev, M.P.^1 ; Fedorova, G.D.^2

V.P. Larionov Institute of Physical-Technical Problems of the North, Siberian Branch, Russian Academy of Sciences, 1 Oktyabrskaja str, Yakutsk

677980, Russia^1

M.K. Ammosov North-Eastern Federal University, 58 Belinsky str, Yakutsk

677027, Russia^2

关键词: ITS applications;    Low qualities;    Magnesia-silicate;    Materials and products;    Mineral additives;    Mineral component;    Mineral composition;    Serpentinization;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/286/1/012020/pdf
DOI  :  10.1088/1757-899X/286/1/012020

来源: IOP

【 摘 要 】

The work studies the applicability of dunite rocks from Inagli massif (South Yakutia) for the production of mixed (composite) cement. The paper reviews the implementation of dunite for manufacturing materials and products. The chemical and mineral compositions of Inagli massif dunite rocks are presented, which relegate the rocks to magnesia-silicate rocks of low-quality in terms of its application as refractory feedstock due to appreciable serpentinization of dunite. The work presents the results of dunite study in terms of its applicability as an additive to Portland cement. The authors have established that dunite does not feature hydraulicity and can be used as a filling additive to Portland cement in the amount of up to 40%. It was unveiled that the mixed grinding of Portland cement and dunite sand with specific surface area of 5500 cm2/g yields the cement that complies with GOST 31108-2016 for CEM II and CEM V normal-cured cements with strength grades of 32.5 and 42.5. The work demonstrates the benefits of the studies of dunite as a filling additive for producing both Portland cement with mineral component and composite (mixed) cement.