Analysis of BJ493 diesel engine lubrication system properties

6th Global Conference on Materials Science and Engineering

Liu, F.^1

Technical Department, Yinjian Automobile Repair Co., Ltd., Beijing

BJ 100070, China^1

关键词: Calculated values;    Calculation results;    Diesel engine design;    Engine lubrication;    Improved designs;    Injection systems;    Lubrication system;    Simulation software;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/283/1/012005/pdf
DOI  :  10.1088/1757-899X/283/1/012005

来源: IOP

【 摘 要 】

The BJ493ZLQ4A diesel engine design is based on the primary model of BJ493ZLQ3, of which exhaust level is upgraded to the National GB5 standard due to the improved design of combustion and injection systems. Given the above changes in the diesel lubrication system, its improved properties are analyzed in this paper. According to the structures, technical parameters and indices of the lubrication system, the lubrication system model of BJ493ZLQ4A diesel engine was constructed using the Flowmaster flow simulation software. The properties of the diesel engine lubrication system, such as the oil flow rate and pressure at different rotational speeds were analyzed for the schemes involving large- and small-scale oil filters. The calculated values of the main oil channel pressure are in good agreement with the experimental results, which verifies the proposed model feasibility. The calculation results show that the main oil channel pressure and maximum oil flow rate values for the large-scale oil filter scheme satisfy the design requirements, while the small-scale scheme yields too low main oil channel's pressure and too high. Therefore, application of small-scale oil filters is hazardous, and the large-scale scheme is recommended.