Impact of large beam-induced heat loads on the transient operation of the beam screens and the cryogenic plants of the Future Circular Collider (FCC)

Cryogenic Engineering Conference 2017

材料科学;物理学

Rodrigues, H Correia^1 ; Tavian, L.^1

CERN, Geneva 23

CH-1211, Switzerland^1

关键词: Design specification;    Distributed beams;    Distribution systems;    Exergetic analysis;    High energy proton beams;    High-energy particle beam;    Superconducting dipoles;    Transient operation;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/278/1/012090/pdf
DOI  :  10.1088/1757-899X/278/1/012090

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The Future Circular Collider (FCC) under study at CERN will produce 50-TeV high-energy proton beams. The high-energy particle beams are bent by 16-T superconducting dipole magnets operating at 1.9 K and distributed over a circumference of 80 km. The circulating beams induce 5 MW of dynamic heat loads by several processes such as synchrotron radiation, resistive dissipation of beam image currents and electron clouds. These beam-induced heat loads will be intercepted by beam screens operating between 40 and 60 K and induce transients during beam injection. Energy ramp-up and beam dumping on the distributed beam-screen cooling loops, the sector cryogenic plants and the dedicated circulators. Based on the current baseline parameters, numerical simulations of the fluid flow in the cryogenic distribution system during a beam operation cycle were performed. The effects of the thermal inertia of the headers on the helium flow temperature at the cryogenic plant inlet as well as the temperature gradient experienced by the beam screen has been assessed. Additionally, this work enabled a thorough exergetic analysis of different cryogenic plant configurations and laid the building-block for establishing design specification of cold and warm circulators.