Numerical study of a gas coupled VM-PT hybrid cryocooler using 3He as the working fluid

Cryogenic Engineering Conference 2017

材料科学;物理学

Wang, J.^1,2 ; Pan, C.Z.^1 ; Zhang, T.^1,2 ; Wang, J.J.^1,2 ; Zhou, Y.^1

CAS Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Beijing

100049, China^1

University of Chinese Academy of Sciences, Beijing

100049, China^2

关键词: Carnot efficiency;    Cooling power;    Improve performance;    Pressure wave generators;    Pulse tube cryocoolers;    Refrigerating capacity;    Stirling pulse tube cryocooler;    Thermal actuation;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/278/1/012049/pdf
DOI  :  10.1088/1757-899X/278/1/012049

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The two-stage Vuilleumier gas-coupling pulse tube cryocooler (VM-PT) is one kind of novel low-frequency cryocoolers. In this gas-coupled form, the single stage Vuilleumier cryocooler serves as both pressure wave generator and a pre-cooler for coaxial pulse tube. Compared with the most commercialized GM and GM pulse tube cryocooler, the two-stage VM-PT cryocooler is characterized by its high stability, compact size and thermal actuation which are indispensable for space application. It has already been verified experimentally that this cryocooler can obtain 9.75mW@4.2K and the lowest no-load temperature 3.39K when4He as the working fluid. However, such refrigerating capacity seems not enough for further application.3He as a more potential substitution of4He has better physical properties to improve performance, which has been studied in GM type and Stirling pulse tube cryocooler. For further optimization, a numerical study on the specific performance of two-stage VM-PT cryocooler using3He is carried out in the present paper though Sage software. Working at the frequency of 1.0Hz and the pressure of 0.8MPa, the two-stage VM-PT cryocooler with3He obtained 50mW@4.06K. The usage of3He was 0.0038kg, about 30L under STP. At 4.2K, using3He can obtain 58mW cooling power and 0.49% relative Carnot efficiency, about 1.6 times higher than using4He.