Conceptual study of the cryostats for the cold powering system for the triplets of the High Luminosity LHC

Cryogenic Engineering Conference 2017

材料科学;物理学

Ballarino, A.^1 ; Giannelli, S.^1 ; Jacquemod, A.^1 ; Leclercq, Y.^1 ; Ortiz Ferrer, C.^1 ; Parma, V.^1

CERN, Geneva 23

CH-1211, Switzerland^1

关键词: Conceptual study;    High temperature superconducting;    Highest temperature;    Integrated luminosity;    Large Hadron collider LHC;    MgB2 superconducting cables;    Operational capabilities;    Particle collision;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/278/1/012155/pdf
DOI  :  10.1088/1757-899X/278/1/012155

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The High Luminosity LHC (HL-LHC) is a project aiming to upgrade the Large Hadron Collider (LHC) after 2020-2025 in order to increase the integrated luminosity by about one order of magnitude and extend the operational capabilities until 2035. The upgrade of the focusing triplet insertions for the Atlas and CMS experiments foresees using superconducting magnets operating in a pressurised superfluid helium bath at 1.9 K. The increased radiation levels from the particle debris produced by particle collisions in the experiments require that the power converters are placed in radiation shielded zones located in a service gallery adjacent to the main tunnel. The powering of the magnets from the gallery is achieved by means of MgB2 superconducting cables in a 100-m long flexible cryostat transfer line, actively cooled by 4.5 K to 20 K gaseous helium generated close to the magnets. At the highest temperature end, the helium flow cools the High Temperature Superconducting (HTS) current leads before being recovered at room temperature. At the magnet connection side, a dedicated connection box allows connection to the magnets and a controlled boil-off production of helium for the cooling needs of the powering system. This paper presents the overall concept of the cryostat system from the magnet connection boxes, through the flexible cryostat transfer line, to the connection box of the current leads.