Risk management for food and beverage industry using Australia/New Zealand 4360 Standard

10th International Seminar on Industrial Engineering and Management "Sustainable Development In Industry and Management"

Kristina, S.^1 ; Wijaya, B.M.^1

Industrial Engineering, Institut Teknologi Harapan Bangsa, Jl. Dipatiukur No. 80-84, Bandung, Indonesia^1

关键词: Australia;    Food and beverage industry;    Problem formulation;    Risk characterization;    Risk Identification;    Risk mappings;    Risk mitigation;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/277/1/012025/pdf
DOI  :  10.1088/1757-899X/277/1/012025

来源: IOP

【 摘 要 】

This research aims to identifying, measuring and establishing risk in food and beverage industry. The risk management is implemented by referring to Australia/New Zealand 4360 Standard which has four phases such as problem formulation, risk analysis, risk characterization, and risk management. The implementation of risk management is done by case study at Back Alley Café. Based on the risk identification result, there are 59 risks were found in Back Alley Café. The risk identification is conducted based on observation and interview with the café manager who understand the condition of Back Alley Café properly. Based on the assessment of impact and probability, the risk mapping produced four risks at extreme level, 16 risks at high level, 24 risks at medium level, and 18 risks at low level. The strategy was designed as the risk mitigation after the risk mapping for the extreme and high level. The strategy which is given as the prevention or treatment of risk in Back Alley Café is divided into three. There are reducing the risk, sharing the risk and accepting the risk. The strategy is then implemented for each relevant activities.