Mesh control information of windmill designed by Solidwork program

10th International Seminar on Industrial Engineering and Management "Sustainable Development In Industry and Management"

Mulyana, T.^1 ; Sebayang, D.^2 ; Rafsanjani, A.M.D.^1 ; Adani, J.H.D.^1 ; Muhyiddin, Y.S.^1

School of Industrial and System Engineering, Universitas Telkom, Indonesia^1

Department of Mechanical Engineering, Universitas Mercu Buana, Indonesia^2

关键词: Control information;    information;    mesh;    Mesh quality;    Simulation time;    solidwork;    Thermal simulations;    windmill;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/277/1/012010/pdf
DOI  :  10.1088/1757-899X/277/1/012010

来源: IOP

【 摘 要 】

This paper presents the mesh control information imposed on the windmill already designed. The accuracy of Simulation results is influenced by the quality of the created mesh. However, compared to the quality of the mesh is made, the simulation time running will be done software also increases. The smaller the size of the elements created when making the mesh, the better the mesh quality will be generated. When adjusting the mesh size, there is a slider that acts as the density regulator of the element. SolidWorks Simulation also has Mesh Control facility. Features that can adjust mesh density only in the desired part. The best results of mesh control obtained for both static and thermal simulation have ratio 1.5.