Experimental and numerical study of Bondura? 6.6 PIN joints

1st Conference of Computational Methods in Offshore Technology

计算机科学

Berkani, I.^1 ; Karlsen, Ø.^2 ; Lemu, H.G.^1

Faculty of Science and Technology, University of Stavanger, Stavanger, Norway^1

Bondura Technology, Bryne, Norway^2

关键词: Contact interface;    Experimental and numerical studies;    Experimental test;    Innovative solutions;    Lubricated joints;    Multi dimensional;    Operation conditions;    Temperature differences;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/276/1/012028/pdf
DOI  :  10.1088/1757-899X/276/1/012028

学科分类：计算机科学（综合）

来源: IOP

【 摘 要 】

Pin joints are widely used in heavy-duty machinery such as aircrafts, cranes and offshore drilling equipment to transfer multi-dimensional shear forces. Their strength and service life depend on the clamping force in the contact region that is provided by interference fits. Though the interference fits provide full contact at the pin-hole interface under pretension loads, the contact interface reduces when the pin is subjected to an external load and hence a smaller contact surface leads to dramatic increase of the contact stress. The PIN joint of Bondura® Technology, investigated in this study, is an innovative solution intended to reduce the slack at the contact surface of the pin joint of heavy-duty machinery by using tapered sleeves on each end of the PIN. The study is aimed to better understand the contact pressure build-up and stress distribution in the supporting contact surface under pre-loading of the joint and the influence of temperature difference between part assembly and operation conditions. Numerical simulation using finite element method and diverse experimental tests were conducted. The numerical simulation and the test results, particularly the tests conducted with lubricated joints, show good conformance.