Finite Element Analysis of New Crankshaft Automatic Adjustment Mechanism of Pumping Unit

1st International Conference on Frontiers of Materials Synthesis and Processing

材料科学;化学

Wu, Jufei^1 ; Wang, Qian^1

Qingdao University of Science and Technology, Qingdao

266061, China^1

关键词: Analysis and calculations;    Ansys workbenches;    Automatic adjustment;    Finite element simulations;    Research object;    Resonance phenomena;    Stress and deformation;    Theoretical calculations;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/274/1/012006/pdf
DOI  :  10.1088/1757-899X/274/1/012006

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

In this paper, the crankshaft automatic adjustment mechanism designed on CYJY10-4.2-53HF pumping unit is used as the research object. The simulation of the friction and bending moment of the crank is carried out by ANSYS Workbench, and the finite element simulation results are compared with the theoretical calculation results to verify the theoretical calculation. The final result is that the finite element analysis of the friction of the crank is basically consistent with the theoretical calculation; The analysis and calculation of the stress and deformation about the two kinds of ultimate conditions of the guide platform are carried out too; The dynamic state analysis of the mechanism is carried out to obtain the vibration modes and natural frequencies of the vibration of the different parts of the counterweight under the condition of no preload force so that the frequency of the array can avoid the natural frequency, and can effectively avoid the resonance phenomenon, and for different modes we can improve the stiffness of the structure.