Behaviour of reinforced concrete slabs with steel fibers

Global Congress on Construction, Material and Structural Engineering 2017

材料科学;土木建筑工程

Baarimah, A.O.^1 ; Syed Mohsin, S.M.^1

Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang, Lebuhraya Tun Razak, Gambang, Kuantan, Pahang

26300, Malaysia^1

关键词: Eurocode2;    Four-point bending test;    NO reduction;    Potential effects;    Shear capacity;    Slab thickness;    Structural behaviour;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/271/1/012099/pdf
DOI  :  10.1088/1757-899X/271/1/012099

来源: IOP

【 摘 要 】

This paper investigates the potential effect of steel fiber added into reinforced concrete slabs. Four-point bending test is conducted on six slabs to investigate the structural behaviour of the slabs by considering two different parameters; (i) thickness of slab (ii) volume fraction of steel fiber. The experimental work consists of six slabs, in which three slabs are designed in accordance to Eurocode 2 to fulfil shear capacity characteristic, whereas, the other three slabs are designed with 17% less thickness, intended to fail in shear. Both series of slabs are added with steel fiber with a volume fraction of Vf= 0%, Vf= 1% and Vf= 2% in order to study the effect and potential of fiber to compensate the loss in shear capacity. The slab with Vf= 0% steel fiber and no reduction in thickness is taken as the control slab. The experimental result suggests promising improvement of the load carrying capacity (up to 32%) and ductility (up to 87%) as well as delayed in crack propagation for the slabs with Vf= 2%. In addition, it is observed that addition of fibers compensates the reduction in the slab thickness as well as changes the failure mode of the slab from brittle to a more ductile manner.