Orthogonal Experimental Study on Tool Lifein Milling TB6 Titanium Alloy

2017 International Conference on Material Engineering and Manufacturing

Liu, Dong^1 ; Wang, Fang^1 ; Wang, Jian Min^1 ; Xue, Yuan^1 ; Xue, Jing^1

College of Mechanical and Material Engineering, North China University of Technology, Beijing

100144, China^1

关键词: Cutting speed;    Flank face;    Milling depth;    Milling parameters;    Milling process;    Orthogonal experiment methods;    Tool wear;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/265/1/012018/pdf
DOI  :  10.1088/1757-899X/265/1/012018

来源: IOP

【 摘 要 】

The tool wear was studied using orthogonal experiment method while milling titanium alloy TB6 in different milling parameters. The flank face wear was measured by the photomicrograph after a certain period of milling During the milling process. It can be seen from the difference results of the experiment that the most significant factor affecting the durability of titanium alloy TB6 cutter is the cutting speed, which difference is 130.67. Followed by the feed, the difference is 106.33; Next is the milling depth and its difference is 61.33; The least significant factor is the milling width.