Effect of filler metals on the mechanical properties of Inconel 625 and AISI 904L dissimilar weldments using gas tungsten arc welding

14th International Conference on Science, Engineering and Technology

自然科学;工业技术

Prabu, S Senthur^1 ; Ramkumar, K Devendranath^1 ; Arivazhagan, N.^1

School of Mechanical Engineering, VIT University, Vellore, Tamil Nadu

632014, India^1

关键词: Dissimilar welding;    Fibrous matrix;    Gas tungsten arc;    Gas tungsten arc welding;    Hardness values;    Parent metal;    Super-austenitic stainless steels;    Welding process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/263/6/062072/pdf
DOI  :  10.1088/1757-899X/263/6/062072

来源: IOP

【 摘 要 】

In the present research work, dissimilar welding between Inconel 625 super alloy and AISI 904L super austenitic stainless steel using manual multi-pass continuous current gas tungsten arc (CCGTA) welding process employed with ERNiCrMo-4 and ERNiCrCoMo-1 fillers were performed to determine the mechanical properties and weldability. Tensile test results corroborated that the fracture had occurred at the parent metal of AISI 904L irrespective of filler used for all the trials. The presence of the macro and micro void coalescence in the fibrous matrix characterised for ductile mode of fracture. The hardness values at the weld interface of Inconel 625 side were observed to be higher for ERNiCrMo-4 filler due to the presence of strengthening elements such as W, Mo, Ni and Cr. The impact test accentuated that the weldments using ERNiCrMo-4 filler offered better impact toughness (41J) at room temperature. Bend test results showed that the weldments using these fillers exhibited good ductility without cracks.