Estimation of Strength of Coating of Solvent Layer on the Basis of Adhesive Building Mixture

International Conference on Construction, Architecture and Technosphere Safety 2017

土木建筑工程

Loganina, V.I.^1 ; Zhegera, Ch. V.^1

Department of Quality Management and Technology of Construction Production, Penza State University of Architecture and Construction, G.Titova Str., Penza

440028, Russia^1

关键词: Adhesive layers;    Dry constructions;    Maximum tangential stress;    methods;    Metrological characteristics;    Solution layers;    Tile adhesive;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/262/1/012149/pdf
DOI  :  10.1088/1757-899X/262/1/012149

学科分类：土木及结构工程学

来源: IOP

【 摘 要 】

The article provides the information on the technique for estimating the strength of adhesion of a solution layer on the shear. The means for the strength of adhesion measuring, their metrological characteristics are proposed. The appearance and operation principle of the GT 2.2.3 device is described. A technique for assessing the strength of adhesion of tile adhesives to the shear using a GT 2.2.3 device is described. The information is given on the results of testing of an adhesive layer on the basis of a cement substrate. It is shown that the tensile stresses appearing in the adhesive layer are less than the tensile strength at shearing, and the shear strength exceeds the values of the maximum tangential stresses.