Design and simulation of integration system between automated material handling system and manufacturing layout in the automotive assembly line

4th International Conference on Mechanical Engineering Research

Seha, S.^1 ; Zamberi, J.^2 ; Fairu, A.J.^2

Centre of Graduate Studies, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Durian Tunggal, Melaka

76100, Malaysia^1

Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Durian Tunggal, Melaka

76100, Malaysia^2

关键词: Automated material handling systems;    Automotive assembly lines;    Design and simulation;    Integration systems;    Material handling;    Material handling systems;    Production efficiency;    Technology and equipments;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/257/1/012017/pdf
DOI  :  10.1088/1757-899X/257/1/012017

来源: IOP

【 摘 要 】

Material handling system (MHS) is an important part for the productivity plant and has recognized as an integral part of today's manufacturing system. Currently, MHS has growth tremendously with its technology and equipment type. Based on the case study observation, the issue involving material handling system contribute to the reduction of production efficiency. This paper aims to propose a new design of integration between material handling and manufacturing layout by investigating the influences of layout and material handling system. A method approach tool using Delmia Quest software is introduced and the simulation result is used to assess the influences of the integration between material handling system and manufacturing layout in the performance of automotive assembly line. The result show, the production of assembly line output increases more than 31% from the current system. The source throughput rate average value went up to 252 units per working hour in model 3 and show the effectiveness of the pick-to-light system as efficient storage equipment. Thus, overall result shows, the application of AGV and the pick-to-light system gave a large significant effect in the automotive assembly line. Moreover, the change of layout also shows a large significant improvement to the performance.