A control algorithm for waveguide path induction soldering with product positioning1

20th International Scientific Conference Reshetnev Readings-2016

Tynchenko, V.S.^1 ; Murygin, A.V.^1 ; Petrenko, V.E.^1 ; Seregin, Yu N.^1 ; Emilova, O.A.^1

Reshetnev Siberian State University of Science and Technology, 31, Krasnoyarsky Rabochy Av., Krasnoyarsk

660037, Russia^1

关键词: Connections between elements;    Field experiment;    Flexible adjustment;    Logic controller;    Numerical experiments;    Product elements;    Product positioning;    Soldering process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/255/1/012018/pdf
DOI  :  10.1088/1757-899X/255/1/012018

来源: IOP

【 摘 要 】

In the article, the problem of developing a control algorithm is described for the induction soldering process of aluminium alloy waveguide paths. The authors suggest a solution using logic controllers in two loops: controlling the speed at which product elements heat up and controlling the waveguide assembly movement relative to the plane of the inductor. The proposed solutions are based on the analysis of the thermal processes occurring in the waveguide pipe and the flange/coupler. Based on the results of numerical experiments, forms of control actions in the system and their parameters were selected. The proposed approach to generating such a control was tested in a series of waveguide path soldering field experiments and the obtained graphs showing the heating of product elements allow the efficiency of the developed logic controllers to be confirmed. The application of the proposed approach provides the high quality regulation of the induction heating process and also the possibility to obtain reliable permanent connections between elements of waveguide paths. Through the flexible adjustment of the proposed logic controller parameters, the high versatility of their use can be demonstrated.