Evaluation of bending rigidity behaviour of ultrasonic seaming on woven fabrics

17th World Textile Conference AUTEX 2017 - Shaping the Future of Textiles

Sevkan Macit, Aye^1 ; Tiber, Bahar^1

Uak University, Engineering Faculty, Textile Engineering Department, Usak-Izmir Yolu, 8. Km 1 Eylul Kampusu, Uak/Merkez, Turkey^1

关键词: Bending behaviour;    Bending length;    Bending rigidity;    Roller type;    Test standards;    Washing process;    Woven fabrics;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/254/13/132002/pdf
DOI  :  10.1088/1757-899X/254/13/132002

来源: IOP

【 摘 要 】

In recent years ultrasonic seaming that is shown as an alternative method to conventional seaming has been investigated by many researchers. In our study, bending behaviour of this alternative method is examined by changing various parameters such as fabric type, seam type, roller type and seaming velocity. For this purpose fifteen types of sewn fabrics were tested according to bending rigidity test standard before and after washing processes and results were evaluated through SPSS statistical analyze programme. Consequently, bending length values of the ultrasonically sewn fabrics are found to be higher than the bending length values of conventionally sewn fabrics and the effects of seam type on bending length are seen statistically significant. Also it is observed that bending length values are in relationship with the rest of the parameters excluding roller type.