Evaluation of the morphology of metal particles in intrinsic conductive polymer dispersions

17th World Textile Conference AUTEX 2017 - Shaping the Future of Textiles

Lempa, E.^1 ; Graßmann, C.^1 ; Rabe, M.^1 ; Schwarz-Pfeiffer, A.^1 ; Van Langenhove, L.^2

Niederrhein University of Applied Sciences, Research Institute for Textile and Clothing, Webschulstraße 31, Mönchengladbach

41065, Germany^1

Ghent University, Department of Textiles, Technologiepark-Zwijnaarde 907, Gent

B-9052, Belgium^2

关键词: Application method;    Conductive Polymer;    Metal components;    Metal particle;    Performance properties;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/254/2/022006/pdf
DOI  :  10.1088/1757-899X/254/2/022006

来源: IOP

【 摘 要 】

For the production of smart textiles the resistivity of prints and coatings with intrinsic conductive polymers is often too high and the performance properties not sufficient. The addition of metal components enhances many characteristics, however the choice of type of metal, morphology and application method influence results to great extend.