Investigation of the influence of heat transfer on screen printed textile conductor

17th World Textile Conference AUTEX 2017 - Shaping the Future of Textiles

Kazani, I.^1 ; De Mey, G.^3 ; Hertleer, C.^2 ; Guxho, G.^1 ; Van Langenhove, L.^2

Polytechnic University of Tirana, Faculty of Mechanical Engineering, Textile and Fashion Department, Mother Tereza, Square, No. 1, Tirana, Albania^1

Ghent University, Department of Textiles, Belgium^2

Department of Electronics and Information Systems, Ghent University, Belgium^3

关键词: Electrically conductive;    Screen-printed;    Textile substrates;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/254/7/072013/pdf
DOI  :  10.1088/1757-899X/254/7/072013

来源: IOP

【 摘 要 】

Two different textile substrates were screen printed with silver-based inks in order to be electrically conductive. In every textile four conductors were printed with different widths in order to investigate the influence of heat transfer on each conductor. This was done, by using the thermo graphic camera and through the evaluation of each conductor's profile. It was found that the conductors printed on the white textile had higher values of heat transfer compared to the other conductors printed on the dark textiles.