Effect of fiber blending ratios of cotton/polyester yarns on retained splice diameter

17th World Textile Conference AUTEX 2017 - Shaping the Future of Textiles

Celik, H.I.^1 ; Kaynak, H.K.^1

Gaziantep University, Faculty of Engineering, Textile Engineering Department, Gaziantep

27310, Turkey^1

关键词: Air pressures;    Blending ratio;    Different pressures;    Fiber blends;    Packing density;    Performance parameters;    Physical characteristics;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/254/14/142005/pdf
DOI  :  10.1088/1757-899X/254/14/142005

来源: IOP

【 摘 要 】

The most important performance parameters of splicing are obtaining adequate strength and appearance at the splice point for all processing requirements. The diameter of spliced portion effects not only appearance of the splice joints but also physical characteristics such as packing density, strength, specific volume of the yarn. In this study, the effect of cotton/polyester fiber blend ratios on spliced portion diameter at different slicing air pressures was investigated. For this aim, three yarn samples 100% cotton, 80-20% CO-PES and 50- 50% CO-PES were produced with 40/1 Ne. Each yarn samples was spliced at three different pressures; 4 bar, 5 bar and 6 bar. The diameters of spliced portion and retained yarns were measured by using ImageJ program and the results were analyzed statistically.