Research on cylinder processes of gasoline homogenous charge compression ignition (HCCI) engine

CAR2017 International Congress of Automotive and Transport Engineering - Mobility Engineering and Environment

工业技术;运输工程

Cofaru, Corneliu^1

Transilvania University of Brasov, 29, Eroilor Blvd., 500036, Romania^1

关键词: Combustion pro-cess;    Combustion timings;    Engine configuration;    Experimental research;    Fuel injection systems;    Homogenous charge compression ignition;    Operational parameters;    Variable valve timing;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/252/1/012070/pdf
DOI  :  10.1088/1757-899X/252/1/012070

学科分类：工业工程学

来源: IOP

【 摘 要 】

This paper is designed to develop a HCCI engine starting from a spark ignition engine platform. The engine test was a single cylinder, four strokes provided with carburetor. The results of experimental research on this version were used as a baseline for the next phase of the work. After that, the engine was modified for a HCCI configuration, the carburetor was replaced by a direct fuel injection system in order to control precisely the fuel mass per cycle taking into account the measured intake air-mass. To ensure that the air - fuel mixture auto ignite, the compression ratio was increased from 9.7 to 11.5. The combustion process in HCCI regime is governed by chemical kinetics of mixture of air-fuel, rein ducted or trapped exhaust gases and fresh charge. To modify the quantities of trapped burnt gases, the exchange gas system was changed from fixed timing to variable valve timing. To analyze the processes taking place in the HCCI engine and synthesizing a control system, a model of the system which takes into account the engine configuration and operational parameters are needed. The cylinder processes were simulated on virtual model. The experimental research works were focused on determining the parameters which control the combustion timing of HCCI engine to obtain the best energetic and ecologic parameters.