Effect of the addition of fibreglass waste on the properties of dried and fired clay bricks

3rd International Conference on Innovative Materials, Structures and Technologies

Guzlena, S.^1 ; Sakale, G.^1 ; Certoks, S.^2 ; Grase, L.^3

Institute of Technical Physics, Facultiy of Material Science and Applied Chemistry, Riga Technical University, P.Valdena 7, Riga, Latvia^1

LODE SIA, Lode street 1, Priekuli country, Latvia^2

Institute of Silicate Materials, Facultiy of Material Science and Applied Chemistry, Riga Technical University, P.Valdena 7, Riga, Latvia^3

关键词: Fired clay bricks;    SEM-EDX analysis;    Technological properties;    Waste glass;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/251/1/012014/pdf
DOI  :  10.1088/1757-899X/251/1/012014

来源: IOP

【 摘 要 】

The main objective of this study was to investigate the effect of the addition of fibreglass waste on the properties of the dried and fired clay bricks. Different amounts of waste glass (0-10 wt %) were added to the original brick clay and fired at 1000 °C. The effects on the technological properties of the bricks such as compressive strength, water absorption and density after firing were investigated. Also cracks and fibreglass influence in dried and fired samples were analysed by digital camera and SEM-EDX analysis.