Phase Change Materials as a solution to improve energy efficiency in Portuguese residential buildings

3rd International Conference on Innovative Materials, Structures and Technologies

Araújo, C.^1 ; Pinheiro, A.^1 ; Bragança, L.^1

University of Minho, Department of Civil Engineering C-TAC, 4800-058 Guimarã es, Portugal^1

关键词: Buildings sector;    Consumption of energy;    Energy plus;    Heating and cooling;    Interior environments;    Melting range;    Portugal;    Residential building;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/251/1/012110/pdf
DOI  :  10.1088/1757-899X/251/1/012110

来源: IOP

【 摘 要 】

The buildings sector contributes to 30% of annual greenhouse gas emissions and consumes about 40% of energy. However, this consumption can be reduced by between 30% and 80% through commercially available technologies. The consumption of energy in the dwellings is mostly associated with the heating and cooling of the interior environment. One solution to reduce these consumptions is the implementation of technologies and Phase Change Materials (PCMs) for Thermal Energy Storage (TES). So, the aim of this work is to analyse the advantages, in terms of decreasing energy consumption, associated with the application of PCMs in Portuguese residential buildings. For this, eight PCMs with different melting ranges were analysed. These materials were analysed through a dynamic simulation performed with EnergyPlus software. The results achieved, showed that the materials studied allow to reduce up to 13% of the heating needs and up to 92% of the cooling needs of a building located in the North of Portugal, at an altitude higher than 100m.