Machining Chatter Analysis for High Speed Milling Operations

1st International Conference on Recent Advances in Aerospace Engineering

航空航天工程

Sekar, M.^1 ; Kantharaj, I.^2 ; Siddhappa, Savale Amit^2

Department of Mechanical Engineering, GMR Institute of Technology, Rajam, India^1

Department of Mechanical Engineering, Karunya University, Coimbatore, India^2

关键词: Closed form solutions;    Delay differential equations;    K methods;    Regenerative chatters;    Stability lobe diagrams;    Time delay differential equation;    Time domain solution;    Unstable conditions;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/247/1/012014/pdf
DOI  :  10.1088/1757-899X/247/1/012014

学科分类：航空航天科学

来源: IOP

【 摘 要 】

Chatter in high speed milling is characterized by time delay differential equations (DDE). Since closed form solution exists only for simple cases, the governing non-linear DDEs of chatter problems are solved by various numerical methods. Custom codes to solve DDEs are tedious to build, implement and not error free and robust. On the other hand, software packages provide solution to DDEs, however they are not straight forward to implement. In this paper an easy way to solve DDE of chatter in milling is proposed and implemented with MATLAB. Time domain solution permits the study and model of non-linear effects of chatter vibration with ease. Time domain results are presented for various stable and unstable conditions of cut and compared with stability lobe diagrams.