Two innovative solutions based on fibre concrete blocks designed for building substructure

FIBRE CONCRETE 2017

Pazderka, J.^1 ; Hájek, P.^1

Department of Building Structures, Faculty of Civil Engineering, Czech Technical University in Prague, Thákurova 7, Praha 6

166 29, Czech Republic^1

关键词: Fibre concrete;    High strength concretes;    In-buildings;    Innovative solutions;    Moisture level;    Technical solutions;    Traditional constructions;    Waterproof layer;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/246/1/012046/pdf
DOI  :  10.1088/1757-899X/246/1/012046

来源: IOP

【 摘 要 】

Using of fibers in a high-strength concrete allows reduction of the dimensions of small precast concrete elements, which opens up new ways of solution for traditional construction details in buildings. The paper presents two innovative technical solutions for building substructure: The special shaped plinth block from fibre concrete and the fibre concrete elements for new technical solution of ventilated floor. The main advantages of plinth block from fibre concrete blocks (compared with standard plinth solutions) is: easier and faster assembly, higher durability and thanks to the air cavity between the vertical part of the block, the building substructure reduced moisture level of structures under the waterproofing layer and a comprehensive solution to the final surface of building plinth as well as the surface of adjacent terrain. The ventilated floor based on fibre concrete precast blocks is an attractive structural alternative for tackling the problem of increased moisture in masonry in older buildings, lacking a functional waterproof layer in the substructure.