Apparatus Producing an Even Distribution of Strain into Carries

World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - WMCAUS

土木建筑工程

Hrabovský, Leopold^1

VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, 17.listopadu 15, Ostrava

708 33, Czech Republic^1

关键词: High rise residential building;    Steel ropes;    Vertical transportation;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/245/2/022097/pdf
DOI  :  10.1088/1757-899X/245/2/022097

学科分类：土木及结构工程学

来源: IOP

【 摘 要 】

In many high-rise residential buildings or multi-storey warehouses, machinery, so called lifts, is used for the vertical transportation of people or weights between two or more altitudinally distant places. Carriers used for lifts are steel ropes or sprocket chains, on which a cage or a counterbalance is hinged. Apparatus of all carriers, attached to the hinge of the cage or counterbalance, should be even. This can be made only by hammer hinge. Fixed or springe hinge cannot be a perfect equalizing apparatus. This article describes an apparatus, which allows an even distribution of the strain into lift carriers, which use springe hinge of carrier ropes.